Tools and Materials You May Need:

• Replacement wing mirror glass
• Flathead screwdriver
• Heat gun or hairdryer (for warming the adhesive)
• Razor blade or plastic trim tool
• Cleaning solution and a soft cloth
• Safety equipment (gloves, safety glasses)

Procedure:

1. Safety Precautions:
   • Ensure the vehicle is parked safely, the engine is turned off, and the handbrake is engaged.
   • Wear safety gloves and glasses to protect your hands and eyes.
2. Remove the Old Mirror Glass:
   • Gently insert a flathead screwdriver or a plastic trim tool between the old mirror glass and the plastic housing. Be cautious not to damage the plastic housing.
   • Apply gentle pressure and carefully pry the old mirror glass away from the housing.
3. Warming the Adhesive:
   • If the mirror glass is firmly attached, you can use a heat gun or a hairdryer to warm the adhesive on the back of the mirror. This will make it easier to remove. Be cautious not to overheat the glass or housing.
   • Heat the adhesive by moving the heat source back and forth over the mirror’s surface. Do not focus the heat in one area for too long.
4. Peel Off the Old Mirror Glass:
   • After warming the adhesive, use a razor blade or plastic trim tool to gently lift and peel away the old mirror glass. Be careful not to scratch the plastic housing.
5. Clean the Housing:
   • Clean the plastic housing with a suitable cleaning solution and a soft cloth. Remove any remaining adhesive residue.
6. Prepare the Replacement Glass:
   • Ensure the replacement mirror glass is clean and free of any dust or debris. You can wipe it with a clean, dry cloth to be sure.
7. Attach the Replacement Glass:
   • Carefully position the replacement mirror glass onto the plastic housing, aligning the attachment points.
   • Press the glass firmly to adhere it to the housing. Apply even pressure to ensure proper adhesion.
8. Final Inspection:
   • Carefully inspect the replacement mirror glass to ensure it’s securely attached and properly aligned within the housing.
9. Test the Mirror:
   • From inside the vehicle, test the mirror’s functionality by adjusting it to ensure it provides a clear and accurate reflection.
10. Adjust the Mirror Position:
    • Adjust the mirror to the desired position for optimal visibility.

Changing the mirror glass for the wing mirror on a Mercedes W201 is typically a straightforward process. However, it’s essential to exercise caution to avoid damaging the plastic housing or the new mirror glass during the replacement. If you’re uncertain about performing this task, or if your vehicle has specific features that make the process more complicated, consider seeking professional assistance.

Tools and Materials You May Need:

• Replacement auxiliary indicator
• Screwdriver or a socket set
• Safety equipment (gloves, safety glasses)

Procedure:

1. Safety Precautions:
   • Ensure the vehicle is parked safely, the engine is turned off, and the handbrake is engaged.
   • Wear safety gloves and glasses to protect your hands and eyes.
2. Locate the Auxiliary Indicator:
   • Identify the location of the auxiliary indicator on your Mercedes W201. On most models, this is typically located on the front fender, near the wheel well.
3. Access the Bulb Housing:
   • Depending on the specific design of your Mercedes 190, you may need to access the bulb housing from under the wheel well or by removing the inner fender liner. In some cases, you can access it directly from the engine bay.
4. Remove the Bulb Housing:
   • Using a screwdriver or a socket set, carefully remove the screws or bolts securing the bulb housing in place.
5. Disconnect the Wiring:
   • Gently disconnect the wiring harness connected to the auxiliary indicator. You may need to use a small flathead screwdriver to release any retaining clips.
6. Remove the Old Indicator:
   • Carefully detach the old auxiliary indicator from the bulb housing. It may have clips or tabs that secure it in place.
7. Install the New Indicator:
   • Align the new auxiliary indicator with the bulb housing and secure it by snapping it into place, making sure it fits securely.
8. Reconnect the Wiring:
   • Reconnect the wiring harness to the new auxiliary indicator. Ensure it clicks or locks into place.
9. Reattach the Bulb Housing:
   • Position the bulb housing back into place and secure it by reinserting and tightening the screws or bolts.
10. Test the Indicator:
    • Turn on your vehicle’s lights to test the new auxiliary indicator. Make sure it functions correctly, including both the parking and turn signal functions.
11. Adjust the Indicator Position:
    • If needed, adjust the new auxiliary indicator’s position to ensure it provides the proper angle and illumination.
12. Final Inspection:
    • Carefully inspect the auxiliary indicator to ensure it is securely attached, properly aligned, and functions correctly.

Changing the auxiliary indicator on a Mercedes W201 is generally a straightforward procedure, but it’s important to follow these steps carefully to ensure proper installation and function. If you’re unsure about performing this task, or if your vehicle has specific features that make the process more complicated, consider seeking professional assistance.

1. Choosing the Wrong Shock Absorbers:
   • Selecting shock absorbers that are not compatible with your vehicle’s make and model can lead to handling and safety issues. Always use the correct shock absorbers for your specific vehicle to maintain ride quality and performance.
2. Not Replacing Both Sides:
   • Replacing only one shock absorber when both are worn or damaged can lead to uneven suspension and handling characteristics. It’s best to replace shock absorbers in pairs (either the front pair or the rear pair) to ensure balanced performance.
3. Improper Installation:
   • Failing to install the shock absorbers correctly can lead to performance problems and safety issues. Make sure to follow the manufacturer’s installation instructions and use the appropriate torque settings for mounting hardware.
4. Neglecting Other Suspension Components:
   • Shock absorbers are just one part of the suspension system. Neglecting to inspect and replace other worn or damaged suspension components like bushings, control arms, or struts can lead to suboptimal ride quality and handling.
5. Not Performing a Wheel Alignment:
   • After replacing shock absorbers, it’s essential to have a wheel alignment performed. Failing to do so can result in uneven tire wear, reduced handling, and alignment-related issues. Proper alignment ensures that all wheels are pointing in the right direction.

It’s crucial to take your time, follow the manufacturer’s instructions, and, if necessary, seek professional assistance when replacing shock absorbers. Proper installation and maintenance are essential for safety, ride quality, and the longevity of your vehicle’s suspension system.